SDRplay Model RSP1 and SDRplay Model RSP2

Wideband USB Radio Receiver. Both in Excellent Condition, only used in the shack (never mobile 😉).

Just add software and an antenna and you'll be amazed at what you can see on your favorite panadapter software.  USB Cable included for each.

The RSP1 covers the radio spectrum from 10kHz (Long Wave) to 2GHz (Microwaves) with up to a massive 10MHz bandwidth.

PRA Special before it hits Ebay on 11/21

RSP1 = $40 (Ebay prices have been $85+)

For the RSP1:

KEY BENEFITS
______________________________________________________________________________________
Ideal for portable operation
No need for an up-converter
Ideal for monitoring of ISM/ IoT/ Telemetry bands <2 GHz
Covers all frequencies from experimental LF through HF, VHF and UHF
Works with all the popular SDR software (including HDSDR, SDR Console, Cubic SDR and SDRuno)
Compatible with existing open source radio software
ExtIO based plugin available
Compatible with Mirics Radio & TV software
Software upgradeable for future standards
Strong and growing software support network
API provided to allow demodulator or application development
Multiplatform support including Windows, Linux, Mac, Android and Raspberry Pi 2/3

RSP2 is SOLD SOLD SOLD SOLD SOLD RSP2 = $75 (Ebay prices have sold for $135+)

For the RSB2:

KEY BENEFITS
______________________________________________________________________________________
• Covers all frequencies from 1kHz through LF, MW, HF, VHF, UHF and L-band with no ‘gaps’
• Supports up to 3 simultaneously connected antennas (2 x 50-Ohms and one High-Z port for lower frequencies)
• Ability to synchronize multiple RSPs
• Excellent dynamic range for challenging reception conditions
• Works with all the popular SDR software (including HDSDR, SDR Console, Cubic SDR and SDRuno)
• ExtIO based plugin available
• Software upgradeable for future standards
• Strong and growing software support network
• API provided to allow demodulator or application development
• Multiplatform driver and API support including Windows, Linux, Mac, Android and Raspberry Pi 2/3
• Up to 16 individual receivers in any 10MHz slice of spectrum using SDRuno
• Calibrated S meter and accurate power and SNR measurements with SDRuno
• Ideal for monitoring of ISM/ IoT/ Telemetry bands <2GHz
• Ideal for portable operation

KEY FEATURES
______________________________________________________________________________________
• Continuous coverage from 1kHz to 2GHz
• 3 software-selectable antenna sockets
• External clock input and output for synchronization purposes, or connection to GPS reference clock
• Up to 10MHz visible bandwidth
• Powers over the USB cable with a simple type B socket
• High Performance ADC silicon technology (not another 8-bit dongle!)
• 10 high-selectivity, built in front-end preselection filters
• Software selectable AM/FM broadcast band notch filters
• Software selectable multi-level Low Noise Preamplifier
• Bias-T power supply for powering antenna-mounted LNA
• RF shielding layer inside robust plastic case option (RSP2)
• Rugged metal case option (RSP2pro)
• SDRuno—World Class SDR software for Windows

73,

Dan - N2SRK