Notifications
Clear all
Topic starter
May 11, 2019 8:29 am
Over the past couple of weeks, there has been a static/interference signal on the input of W0CFI/R. This is a good reminder for all of us to confirm:
- if you have a multi-mode radio, make sure your transmit mode is set appropriately
- if you are set up for cross-band repeat of your gear, test it and confirm functionality; do not simply 'leave-it-on.'
- make sure your hotspots are not programmed for a frequency in repeater band plans.
- when in doubt, ask, ask, ask, ask, ask. 🙂
73 & See you on the air!
AE2L reacted
