Notifications
Clear all
Topic starter
April 6, 2020 11:45 am
On a Yaesu FT2D, how do you turn off APRS signaling? I was able to configure and use but can't figure out the "off" switch for APRS packets. I though I could go to the menu setting and turn off the modem, but that didn't work.
April 7, 2020 9:26 pm
Paul, on the FT3D, (essentially the same radio with a color screen), the APRS on/off switch is in the APRS Modem screen. The settings are Off/1200/9600. Basically, the on/off is governed by the modem menu. Hope that helps!
K0FTN